Home  /   Brands  /   ALO Audio  /   Amplifier  /   Studio Six
ALO Audio

Studio Six

HK$34,800

The Studio Six is a Class-A single-ended triode (SET) circuit design. Zero-feedback and 100% tube amplification. It's tubes have been hand-picked based on their long established reputations for sonic virtue.

The 'overbuilt' power supply features robust multi-stage high-voltage filtering, for superior low-frequency performance.

A proprietary output stage accommodates a wide range of headphone impedance from 8 to 600-Ohms, with ease. The Studio Six drives many pairs of headphones with no sacrifice to fidelity. The ideal amp for shared listening sessions.

The Studio Six features uncompromising quality in build and design throughout. A timeless design built to last a lifetime and deliver an unmatched sonic experience.

Reference Amplification
Class-A single-ended triode (SET) circuit design with zero-feedback and 100% tube amplification. Designed for resolution of fine musical details, expansive soundstage presentation, and lush tonal quality.
All Tubes
Only tubes with established reputations for sonic virtue are in this design. Selecting tubes that are now and will continue to be available in the global audio marketplace.
Pure Power
The power supply is a "virtual dual mono block" design. Featuring vacuum tube rectification. Filtering for the Left and Right input stages, including two glow discharge regulator tubes. And separate multi-stage filtering for each Left and Right Channel output tube.
Designed For Headphones
A proprietary output stage accommodates a wide range of headphone impedance from 8 to 600-Ohms, with ease. The Studio Six drives many pairs of headphones with no sacrifice to fidelity. The ideal amp for shared listening sessions.

Specification

Headphone impedance compatibility range

8 Ohms to 600 Ohms

Maximum rated output power

1,000 milliwatts into 8 to 32 Ohms

Amplifier input impedance

95k-Ohms

Amplifier input Voltage for full-rated output voltage into various headphone impedances

1.00V RMS input for 4.0V RMS output into 16 Ohms
1.30V RMS input for 5.7V RMS output into 32 Ohms
1.70V RMS input for 7.5V RMS output into 75 Ohms
1.85V RMS input for 8.3V RMS output into 150 Ohms
1.70V RMS input for 8.2V RMS output into 300 Ohms
1.65V RMS input for 8.1V RMS output into 600 Ohms

THD+N (1kHz input) at 1V RMS output into stated load impedances

32 Ohms: 0.26%
150 Ohms: 0.12%

THD+N (1kHz input) at 250 milliwatts output into stated impedances

32 Ohms: 1.0%
150 Ohms: 2.0%

Frequency Response -3dB (Referenced to 1kHz, 250 milliwatts output) into stated impedances

32 Ohms: 6.0Hz to 39kHz
150 Ohms: 16.5Hz to 36kHz

Frequency Response -1dB at full-rated (2.83V RMS) 1,000 milliwatt output into 8 Ohms

15Hz to 20kHz

S/N Ratio

78dB (unweighted) below full 2.83V RMS output into 8 Ohms

Power and Battery

Power (Mains) Compatibility

100, 120 or 240 VAC (factory selected), 50-60Hz

Power Consumption

65 Watts Maximum

Reviews

Welcome to leave your comments for other users' reference

Average Rating
0
Number of Reviews
0
Leave your comment